[Aug 15, 2024] 350-601 Test Engine files, 350-601 Dumps PDF
Latest Cisco 350-601 PDF and Dumps (2024) Free Exam Questions Answers
Cisco 350-601, also known as Implementing Cisco Data Center Core Technologies (350-601 DCCOR) exam is designed to test the knowledge and skills of candidates who want to become Cisco Certified Network Professional (CCNP) Data Center certified. 350-601 exam covers a wide range of topics related to data center infrastructure, virtualization, automation, and security. Passing 350-601 exam will validate a candidate's knowledge and ability to implement and manage data center technologies.
NEW QUESTION # 132
An engineer deploys a custom guest shell rootfs onto multiple switches. Drag and drop the steps from the left into the correct order on the right.
Answer:
Explanation:
Explanation
https://www.cisco.com/c/en/us/td/docs/switches/datacenter/nexus9000/sw/93x/progammability/guide/b-cisco-nex
NEW QUESTION # 133
An engineer is using REST API calls to configure the cisco APIC. Which data structure must be used within a post message to receive a login token?
A)
B)
C)
D)
- A. Option A
- B. Option B
- C. Option C
- D. Option D
Answer: C
Explanation:
https://www.cisco.com/c/en/us/td/docs/switches/datacenter/aci/apic/sw/2-x/rest_cfg/2_1_x/ b_Cisco_APIC_REST_API_Configuration_Guide/b_Cisco_APIC_REST_API_Configuration_Guide_chapter_01.html
NEW QUESTION # 134
Refer to the exhibit.
A flapping link issue has been reported on the vPC keepalive link. A packet capture has been activated on the Cisco Nexus switch. What is the destination IP address of the vPC keepalive packets that are sent by the switch?
- A. 239.255.70.83
- B. 192.168.254.4
- C. 192.168.254.2
- D. 192.168.254.1
Answer: B
NEW QUESTION # 135
An engineer is implementing NPV mode on a Cisco MDS 9000 Series Switch. Which action must be taken?
- A. A port channel must be configured to the upstream switch.
- B. The FCNS database must be disabled in the fabric.
- C. NPIV must be enabled on the upstream switch.
- D. All switches in the fabric must be Cisco MDS switches.
Answer: C
Explanation:
https://www.cisco.com/c/en/us/td/docs/switches/datacenter/mds9000/sw/5_0/configuration/guides/int/nxos/cli_in
NEW QUESTION # 136
Drag and drop the technologies from the left onto the description on the right.
Answer:
Explanation:
Explanation:
NFSv2
NFSv4
Kerberos
RADIUS
NEW QUESTION # 137 
Refer to the exhibit. Software downgrade is required on a Cisco Nexus 7000 Series Switch. What is displayed when this command is executed?
- A. features and commands that are removed automatically from the configuration
- B. compatibility of software in the system bootflash file
- C. impact of a software upgrade in ISSU and chassis reload
- D. features that are enabled automatically after the downgrade
Answer: A
NEW QUESTION # 138 
Refer to the exhibit. A pair of Cisco Nexus switches form a vPC. A new chassis s added to the pre-existing Cisco UCS domain. A new chassis must be discovered, and all links from the chassis to the LAN network must be established. Which set of actions accomplishes these requirements?
- A. Option A
- B. Option B
- C. Option C
- D. Option D
Answer: C
NEW QUESTION # 139 
Refer to the exhibit. Which action is taken to ensure that the relay agent forwards the DHCP BOOTREQUEST packet to a DHCP server?
- A. Enable the DHCP relay agent.
- B. Configure the interface of the DHCP server as untrusted.
- C. Configure the IP address of the DHCP server.
- D. Verify the DHCP snooping bindings.
Answer: D
Explanation:
Section: Security
Explanation/Reference:
Reference:
https://www.cisco.com/en/US/docs/ios/12_4t/ip_addr/configuration/guide/htdhcpre.html
NEW QUESTION # 140
Refer to the exhibit.
Why does the Python code for Cisco NX-API print an error message?
- A. The "type" is wrong in the header of the request and should be "cli_conf"
- B. NX-API does not allow configuration for features via the requests module.
- C. The JSON is not a supported format for the NX-API.
- D. The "type" is wrong in the body of the request and should be "cli_conf"
Answer: B
Explanation:
Section: Automation
NEW QUESTION # 141
Refer to the exhibit.
A network engineer is using tcpdump to capture a snapshot of OSPF-related traffic on a specific Cisco NX-OS switch port. For security reasons, the capture must be taken using an embedded container that is already deployed on the Cisco Nexus device. Which command completes the script?
- A. guestshell
- B. guestshell-bash
- C. run guestshell
- D. run bash
Answer: C
Explanation:
The command run guestshell is used to access the Guest Shell on Cisco NX-OS devices. Guest Shell is a secure, Linux-based environment that runs as a virtualized application container on the device. It allows network administrators to use Linux utilities and scripts, enhancing automation and monitoring capabilities. In this scenario, using run guestshell would enable the engineer to utilize the tcpdump utility within the container to capture OSPF-related traffic on the switch port1.
References := For more information on using Guest Shell for traffic capture and other advanced features on Cisco NX-OS devices, you can refer to the Cisco documentation on Embedded Packet Capture (EPC) and Guest Shell configuration1
NEW QUESTION # 142
Refer to the exhibit.
An engineer must create a Bash script to run in the Cisco NX-OS Guest Shell. The script must loop through the available namespaces and output all registered interfaces. Which code snippet completes the script?
- A. ifconfig "$ns";
- B. chvrf "Sns";
- C. echo "$ns";
- D. vrfinfo'Sns";
Answer: A
NEW QUESTION # 143
Refer to the exhibit.
The STP priority of N7K-1 and N7K-2 are the lowest in the network. Which statement describes STP on the vPC?
- A. N7K-1 preempts N7K-2 as the STP root.
- B. N7K-2 appears as the STP root.
- C. N7K-1 and N7K-2 appear as a single STP root.
- D. N7K-1 appears as the STP root.
Answer: C
NEW QUESTION # 144
All logins to a Cisco Nexus 9000 Series Switch must pass through the TACACS+ server at IP address
192.168.10.10. The configuration must meet these requirements:
* The TACACS+ server must be used for SSH and Telnet.
* The TACACS+ server key must be Cisco123!.
* Management VRF must be used for connectivity.
* The deployment must fail back to local credentials if the TACACS+ server fails to respond within 30 seconds.
Drag and drop the code snippets from the right onto the blanks in the code on the left to complete the configuration. Not all code snippets are used.
Answer:
Explanation:
NEW QUESTION # 145
Which statement is true about upgrading the firmware on a Cisco MDS storage switch with dual supervisors?
- A. The new firmware is load on the standby supervisor first.
- B. Supervisors can be upgraded independently to test the new firmware.
- C. The standby supervisor must be offline before the firmware upgrade begins.
- D. Both supervisors load the new firmware and then the active supervisor reboots.
Answer: A
Explanation:
The statement that is true about upgrading the firmware on a Cisco MDS storage switch with dual supervisors is that the new firmware is load on the standby supervisor first. This is part of the non-disruptive upgrade process that allows the switch to continue operating while the firmware is updated. The standby supervisor receives the new firmware image and reloads with the new version, while the active supervisor remains in service with the old version. Then, a switchover occurs, making the standby supervisor the new active one, and the old active supervisor receives the new firmware image and reloads. Finally, the modules are upgraded one by one, starting from the lowest numbered module. The other statements are not true because:
* The standby supervisor does not need to be offline before the firmware upgrade begins. It can be online and in standby mode, ready to receive the new firmware image and reload.
* Both supervisors do not load the new firmware and then the active supervisor reboots. This would cause a disruption of service and a loss of configuration. The firmware upgrade is done in a sequential manner, with one supervisor at a time.
* Supervisors cannot be upgraded independently to test the new firmware. The firmware versions on both supervisors must match, otherwise the switchover will fail and the switch will not operate properly.
References: For more details on how to perform a firmware upgrade on a Cisco MDS storage switch, please refer to the following resources:
* How to Perform an MDS 9000 Series Switch Non-Disruptive Upgrade
* Cisco MDS 9000 NX-OS Software Upgrade and Downgrade Guide, Release 6.2(x)
NEW QUESTION # 146
An engineer must configure SAN connectivity in Cisco UCS manager. The requirement is to specify the WWPN of the storage array and set the zoning type to single initiator multiple targets. The engineer must also configure interrupt handling and queues of the vHBA interface. Which two Cisco UCS policies should be used to configure the settings? (Choose two.)
- A. SAN connectivity policy
- B. Fibre Channel adaptor policy
- C. vHBA policy
- D. boot policy
- E. storage connection policy
Answer: B,E
NEW QUESTION # 147
An engineer is enabling port security on a Cisco MDS 9000 Series Switch. Which feature of enabling port security on a Cisco MDS 9000 Series Switch must be considered?
- A. It binds the fabric at the switch level.
- B. It authorizes only the configured sWWN to participate in the fabric.
- C. It always learns about switches that are logging in.
- D. It can be distributed by using Cisco Fabric services.
Answer: D
Explanation:
https://www.cisco.com/c/en/us/td/docs/switches/datacenter/mds9000/sw/6_2/configuration/guides/security/nx-os/sec_cli_6-x/psec.html#92130
NEW QUESTION # 148
......
Cisco CCIE Data Center
From the name, one can argue that CCIE Data Center is the expert-level version of the above-mentioned CCNP Data Center certificate, and rightly so. This is an advanced-level certification that confirms your expert mastery of planning, designing, implementing, and managing complex data center infrastructure in modern IT environments. Here, the exam candidates play a crucial role in harnessing advanced domain knowledge and emerging technologies to satisfy the business goals. To earn such a designation, you will have to nail 350-601 exam alongside the lab CCIE Data Center v3.0 test.
The Cisco 350-601 exam consists of multiple-choice questions and simulation-based questions that test the candidate's ability to configure and troubleshoot data center technologies. Candidates are required to pass the exam with a minimum score of 825 out of 1000 to earn the Implementing Cisco Data Center Core Technologies certification.
Pass Your CCNP Data Center 350-601 Exam on Aug 15, 2024 with 490 Questions: https://testking.vceprep.com/350-601-latest-vce-prep.html