IdentityIQ-Engineer Free Exam Study Guide! (Updated 124 Questions)
IdentityIQ-Engineer Dumps for Identity Security Engineer Certified Exam Questions and Answer
NEW QUESTION # 44
Is this what should be performed in order to generate the database script to extend Application attributes in the IdentitylQ database on the initial installation?
Solution: Add the new object attribute to the Application ObjectConfig in IdentitylQ.
- A. No
- B. Yes
Answer: A
Explanation:
Adding a new object attribute to the Application ObjectConfig in IdentityIQ is not sufficient on its own to generate the database script needed to extend Application attributes. This action updates the configuration within IdentityIQ for how the application object is managed, but it does not produce the necessary SQL scripts to modify the underlying database schema. The actual database schema must be extended using specific IdentityIQ tools and commands like iiq extendedSchema.
Reference:
SailPoint IdentityIQ Configuration Guide (ObjectConfig and Schema Management) SailPoint IdentityIQ Administration Guide (Database Schema Extension)
NEW QUESTION # 45
Is this a correct procedure for testing generated emails in a non-production system?
Solution: Change the Email Notification Type to POP3 under Global Settings > Configure IdentitylQ Settings > Mail Settings, run the test scenario. and verity if the emails were successfully delivered to mailboxes specified on Identity objects.
- A. No
- B. Yes
Answer: A
NEW QUESTION # 46
Can this action be performed as part of configuring an application definition in IdentitylQ?
Solution: Specify which users should be provisioned with a basic account as part of a joiner event.
- A. Yes
- B. No
Answer: A
Explanation:
Yes, this action can be performed as part of configuring an application definition in IdentityIQ. When defining an application, you can specify provisioning policies, including which users should be provisioned with a basic account as part of a joiner event. This is typically done by setting up account creation rules or provisioning policies that trigger when a new user (joiner) is detected, ensuring they receive the necessary basic accounts and entitlements.
Therefore, the correct answer is A. Yes.
NEW QUESTION # 47
Is this statement true about identitylQ's syslog event storage?
Solution: IdentitylQ logging and auditing both require extra function calls within the application and will generate data that can be compressed to avoid any storage and Improve overall performance.
- A. No
- B. Yes
Answer: A
Explanation:
The statement is false. While it is true that logging and auditing require extra function calls and generate data, the suggestion that this data can be compressed to avoid storage issues and improve performance is misleading. In practice, while compression might save storage space, it does not inherently improve performance, particularly because the overhead of compression and decompression could negate the performance benefits. Effective performance management in IdentityIQ involves more nuanced approaches, such as optimizing the level of detail in logs, managing log rotation, and tuning the system for efficient I/O operations.
Reference:
SailPoint IdentityIQ Logging and Auditing Guide
SailPoint IdentityIQ Performance Tuning Guide
NEW QUESTION # 48
Select the best policy type for defining each access policy. Use the drop-down menus to select your answers.
Answer:
Explanation:
NEW QUESTION # 49
An organization is making a change at the regional level.
Many users of a financial system have incorrect entitlements. Some users are missing entitlements, and some users have excess entitlements. Work needs to be performed to clean up access.
Is this one of the IdentuylQ batch request types that can help meet this goal?
Solution: Delete Entitlement
- A. No
- B. Yes
Answer: A
Explanation:
The "Delete Entitlement" batch request type is not designed for cleaning up access by correcting or updating entitlements in bulk. Instead, "Delete Entitlement" is used to remove specific entitlements from the system entirely, which may not be what is needed if the goal is to correct incorrect entitlements (e.g., removing excess entitlements while adding missing ones). For the scenario described, where users need their entitlements corrected, other batch processes such as "Update Entitlement," "Revoke Access," or specific role re-assignment processes would be more appropriate.
Reference:
SailPoint IdentityIQ Batch Request Types Documentation
SailPoint IdentityIQ Administration Guide (Entitlement Management Sections)
NEW QUESTION # 50
An engineer needs to first create a custom audit event and then set up an associated report. What are four steps to accomplish this goal?
Solution:
- A. No
- B. Yes
Answer: A
Explanation:
The solution provided is incomplete. To create a custom audit event and set up an associated report, the process involves several steps, including defining the custom audit event in the Audit Configuration object, updating or creating relevant audit triggers in the system, and defining the custom report using XML or the IdentityIQ report editor. The steps mentioned in the solution do not cover the necessary configuration and implementation details required for this task. For a complete process, consult the SailPoint IdentityIQ Reporting Guide and the Audit Framework documentation.
NEW QUESTION # 51
The engineer is configuring a new application definition.
The customer wants an Audit record to be created with the error message, if provisioning fails.
Is this the rule an engineer should write to accomplish the goal?
Solution: Write an AfterProvisioning rule.
- A. No
- B. Yes
Answer: A
Explanation:
An AfterProvisioning rule in SailPoint IdentityIQ is typically used to execute custom logic after the provisioning process has been completed successfully. However, if provisioning fails, this rule will not be triggered because it is specifically designed for post-successful provisioning activities. To log an error message in the audit record when provisioning fails, a better approach would be to use a provisioning error handler or configure a specific workflow that captures errors and logs them accordingly. The AfterProvisioning rule is not the correct solution for this use case. Refer to the SailPoint IdentityIQ Provisioning and Workflow documentation for appropriate methods of handling provisioning errors and audit logging.
NEW QUESTION # 52
An engineer is assigned to configure an account attribute. The requirements are:
Purpose: Flag privileged accounts
Read from: Financial application, privileged attribute
Calculate from: Keystore application, responsibility-code attribute
Usage 1: Display as option in Advanced Analytics
Usage 2: Use when writing rules
Usage 3: Include in policies
Does the engineer need to set this configuration option on the account attribute to meet the requirements?
Solution: Edit Mode: Read Only
- A. No
- B. Yes
Answer: A
Explanation:
Setting the configuration option "Edit Mode: Read Only" on the account attribute would not meet the requirements as specified. The requirement to "Calculate from: Keystore application, responsibility-code attribute" implies that the attribute needs to be dynamically calculated or updated based on another attribute. If the attribute is set to "Read Only," it cannot be modified, which would prevent it from being calculated or updated as needed. Therefore, "Edit Mode: Read Only" should not be used in this scenario.
Reference:
SailPoint IdentityIQ Administration Guide (Sections on Account Attributes and Attribute Calculation) SailPoint IdentityIQ Configuration Guide (Field Properties and Edit Modes)
NEW QUESTION # 53
Is this what should be performed in order to generate the database script to extend Application attributes in the IdentitylQ database on the initial installation?
Solution: Run a build with the updated schema placed inside it.
- A. No
- B. Yes
Answer: A
Explanation:
Running a build with the updated schema placed inside it is not the correct procedure to generate the database script to extend Application attributes in the IdentityIQ database during the initial installation. To extend the schema, you typically need to define the changes in a specific XML schema file and then generate the corresponding database scripts using IdentityIQ tools designed for schema extension. A build process does not inherently generate the required database scripts for extending attributes.
Reference:
SailPoint IdentityIQ Schema Configuration Guide
SailPoint IdentityIQ Installation and Setup Guide
NEW QUESTION # 54
Is this statement correct about writing and executing source mapping rules to populate identity attributes?
Solution: All Identity Mappings must use a rule to set the identity attribute.
- A. No
- B. Yes
Answer: A
Explanation:
The statement "All Identity Mappings must use a rule to set the identity attribute" is incorrect. While source mapping rules can be used to populate identity attributes dynamically, it is not mandatory for all identity mappings to rely on a rule. Identity mappings can also be configured using direct mappings, where attributes from a source are directly mapped to IdentityIQ attributes without any rule-based logic.
Therefore, the correct answer is B. No.
NEW QUESTION # 55
A client needs a custom quicklink, which only managers can launch, in order to launch a simple workflow. Is this a valid step to take during the development of this custom quicklink?
Solution: Set the quicklink options to Tor Others" in order to launch the workflow immediately when the quicklink is clicked.
- A. No
- B. Yes
Answer: A
Explanation:
The statement is incorrect. The "For Others" option in the quicklink configuration is used to allow users to perform actions on behalf of other identities (e.g., a manager performing an action for a subordinate). However, setting the quicklink to "For Others" does not make it launch a workflow immediately. To have a quicklink launch a workflow immediately when clicked, you would typically need to configure the quicklink to call the workflow directly, without requiring additional user input. "For Others" is more about the context of the action rather than triggering workflows automatically.
Reference:
SailPoint IdentityIQ Quicklink Development Guide
SailPoint IdentityIQ Administration Guide (Quicklink and Workflow Configuration)
NEW QUESTION # 56
An engineer is developing an instance of IdentitylQ using the Services Standard Build (SSB) for a client. Is this a valid action the engineer can perform when setting up or using the SSB?
Solution: Place the patch jar file in the build's base/patch folder that matches the patch version the client is using
- A. Yes
- B. No
Answer: A
Explanation:
Yes, this is a valid action. When using the Services Standard Build (SSB) in SailPoint IdentityIQ, placing the patch jar file in the build's base/patch folder is a correct procedure, provided the patch version matches what the client is using. This allows the build process to incorporate the patch into the deployment, ensuring that the correct versions and fixes are applied to the IdentityIQ instance.
Reference:
SailPoint IdentityIQ Services Standard Build Guide
SailPoint IdentityIQ Patching and Version Management Guide
NEW QUESTION # 57
Is this a correct procedure for testing generated emails in a non-production system?
Solution: Change the Email Notification Type to Redirect to file using FTP protocol under Global Settings > Configure IdentitylQ Settings > Mail Settings, run the test scenario, and verify that the email text saved to the redirected file.
- A. No
- B. Yes
Answer: A
Explanation:
The proposed solution suggests changing the Email Notification Type to "Redirect to file using FTP protocol" under Global Settings > Configure IdentityIQ Settings > Mail Settings. However, IdentityIQ does not provide an option to redirect emails to a file using the FTP protocol directly through the Global Settings in the application.
Typically, to test generated emails in a non-production environment, you would change the Email Notification Type to "Redirect to File" (if the option is available) or configure an SMTP server with a different setup that captures emails in a file or a specific mailbox designed for testing purposes. The specific steps for testing email generation may vary, but the solution as stated does not align with standard IdentityIQ practices.
Thus, the correct answer is B. No.
NEW QUESTION # 58
Can the following action be performed using Rapid Setup application onboarding?
Solution: Specify account correlation using a rule.
- A. No
- B. Yes
Answer: A
Explanation:
Specifying account correlation using a rule cannot be performed using the Rapid Setup application onboarding process. Rapid Setup is designed for straightforward and simplified onboarding processes with a focus on quick configuration, typically using predefined templates and options. However, advanced configurations like custom account correlation rules require more detailed setup, typically done outside of the Rapid Setup UI, involving scripting or detailed configuration within the application definition.
Reference:
SailPoint IdentityIQ Rapid Setup Guide
SailPoint IdentityIQ Administration Guide (Account Correlation and Application Onboarding Sections)
NEW QUESTION # 59
Is this a correct procedure for testing generated emails in a non-production system?
Solution: Change the Email Notification Type to POP3 under Global Settings > Configure IdentitylQ Settings > Mail Settings, run the test scenario. and verity if the emails were successfully delivered to mailboxes specified on Identity objects.
- A. No
- B. Yes
Answer: A
Explanation:
Changing the Email Notification Type to POP3 under Global Settings > Configure IdentityIQ Settings > Mail Settings is not a correct procedure for testing generated emails in a non-production system. POP3 is an email retrieval protocol, not a method for sending or redirecting email notifications from IdentityIQ. IdentityIQ requires an SMTP server to send emails, and POP3 is typically used by email clients to retrieve emails from a server, not by a server to send emails.
For testing purposes in a non-production environment, you would typically configure the SMTP server settings to either redirect emails to a specific testing mailbox or use a "Redirect to File" option, if available, to capture emails locally.
Thus, the correct answer is B. No.
NEW QUESTION # 60
An engineer needs to first create a custom audit event and then set up an associated report. What are four steps to accomplish this goal?
Solution: Create and load a Custom Audit Report TaskDefinition XML and corresponding Custom Audit Report Form XML.
- A. Yes
- B. No
Answer: A
Explanation:
Creating and loading a Custom Audit Report TaskDefinition XML and corresponding Custom Audit Report Form XML is indeed part of the process for setting up a custom audit report in SailPoint IdentityIQ. The TaskDefinition XML defines the report task, and the Form XML defines the user interface for running the report. These steps are essential to creating a custom audit report, and the solution correctly outlines a valid approach. Refer to the SailPoint IdentityIQ Reporting Guide, particularly the section on creating custom reports and forms, for more detailed instructions.
NEW QUESTION # 61
......
SailPoint IdentityIQ-Engineer Exam Syllabus Topics:
| Topic | Details |
|---|---|
| Topic 1 |
|
| Topic 2 |
|
| Topic 3 |
|
Use Real IdentityIQ-Engineer Dumps - 100% Free IdentityIQ-Engineer Exam Dumps: https://testking.vceprep.com/IdentityIQ-Engineer-latest-vce-prep.html