Latest May 20, 2025 Real 200-301 Exam Dumps Questions Valid 200-301 Dumps PDF
Cisco 200-301 Exam Dumps - PDF Questions and Testing Engine
Important Details of Cisco 200-301 Exam
Cisco doesn’t reveal the details of its exams beforehand, so the exact number of questions and their types are unknown. The question formats that may appear in the 200-301 test include testlets, simlets, multiple choice, and drag and drop. Note that all the questions in the exam are to be completed within the allocated time of 2 hours. To schedule this certification test, the students need to sign up with Pearson VUE and pay the registration fee of $300.
Cisco 200-301 Exam Certification Details:
| Passing Score | Variable (750-850 / 1000 Approx.) |
| Exam Registration | PEARSON VUE |
| Number of Questions | 90-110 |
| Exam Name | Implementing and Administering Cisco Solutions |
| Exam Code | 200-301 CCNA |
| Recommended Training | Implementing and Administering Cisco Solutions (CCNA) |
| Sample Questions | Cisco 200-301 Sample Questions |
| Exam Price | $300 USD |
NEW QUESTION # 213
An engineer needs to add an old switch back into a network. To prevent the switch from corrupting the VLAN database which action must be taken?
- A. Add the switch in the VTP domain with a higher revision number
- B. Add the switch with DTP set to dynamic desirable
- C. Add the switch with DTP set to desirable
- D. Add the switch in the VTP domain with a lower revision number
Answer: D
NEW QUESTION # 214
What are two southbound APIs? (Choose two )
- A. OpenFlow
- B. NETCONF
- C. Thrift
- D. CORBA
- E. DSC
Answer: A,B
Explanation:
OpenFlow is a well-known southbound API. OpenFlow defines the way the SDN Controller should interact with the forwarding plane to make adjustments to the network, so it can better adapt to changing business requirements.
The Network Configuration Protocol (NetConf) uses Extensible Markup Language (XML) to install, manipulate and delete configuration to network devices.
NEW QUESTION # 215
DRAG DROP
Drag and drop the network protocols from the left onto the correct transport services on the right.
Select and Place:
Answer:
Explanation:
Section: IP Services
NEW QUESTION # 216
Refer to the exhibit.
Traffic that is flowing over interface TenGigabitEthernet0/0 experiences slow transfer speeds. What is the reason for the issue?
- A. heavy traffic congestion
- B. a speed conflict
- C. queuing drops
- D. a duplex incompatibility
Answer: B
NEW QUESTION # 217
Which deployment model on a Cisco ASA Firepower module in multiple-context mode allows you to evaluate the contents of the traffic without affecting the network?
- A. passive tap monitor-only mode
- B. inline mode
- C. passive monitor-only mode
- D. inline tap monitor-only mode
Answer: D
Explanation:
Explanation/Reference: https://www.cisco.com/c/en/us/td/docs/security/asa/asa912/configuration/firewall/asa-912-firewall- config/access-sfr.html
NEW QUESTION # 218
Which IEEE mechanism is responsible for the authentication of devices when they attempt to connect to a local network?
- A. 802.1x
- B. 802.3x
- C. 802.11
- D. 802.2x
Answer: A
NEW QUESTION # 219
An engineer is configuring NAT to translate the source subnet of 10.10.0.0/24 to any of three addresses
192.168.30.1, 192.168.3.2, 192.168.3.3 Which configuration should be used?
- A. Option A
- B. Option B
- C. Option C
- D. Option D
Answer: C
NEW QUESTION # 220
Refer to the exhibit. Which two values does router R1 use to determine the best path to reach destinations in network 1.0.0.0/8? (Choose two.)
- A. lowest cost to reach the next hop
- B. lowest metric
- C. highest administrative distance
- D. highest metric
- E. longest prefix match
Answer: B,E
NEW QUESTION # 221
in Which way does a spine and-leaf architecture allow for scalability in a network when additional access ports are required?
- A. A leaf switch can be added with connections to every spine switch
- B. A leaf switch can be added with a single connection to a core spine switch.
- C. A spine switch and a leaf switch can be added with redundant connections between them
- D. A spine switch can be added with at least 40 GB uplinks
Answer: A
Explanation:
Spine-leaf architecture is typically deployed as two layers: spines (such as an aggregation layer), and leaves (such as an access layer). Spine-leaf topologies provide high-bandwidth, low-latency, nonblocking server-to-server connectivity.
Leaf (aggregation) switches are what provide devices access to the fabric (the network of spine and leaf switches) and are typically deployed at the top of the rack. Generally, devices connect to the leaf switches.
Devices can include servers, Layer 4-7 services (firewalls and load balancers), and WAN or Internet routers. Leaf switches do not connect to other leaf switches. In spine-and-leaf architecture, every leaf should connect to every spine in a full mesh.
Spine (aggregation) switches are used to connect to all leaf switches and are typically deployed at the end or middle of the row. Spine switches do not connect to other spine switches.
NEW QUESTION # 222
Which protocol does an access point use to draw power from a connected switch?
- A. Cisco Discovery Protocol
- B. Adaptive Wireless Path Protocol
- C. Internet Group Management Protocol
- D. Neighbor Discovery Protocol
Answer: A
Explanation:
Section: Network Access
NEW QUESTION # 223
Drag and drop the attack-mitigation techniques from the left onto the Types of attack that they mitigate on the right.
Answer:
Explanation:
Explanation:
NEW QUESTION # 224
A network engineer must create a diagram of a multivendor network. Which command must be configured on the Cisco devices so that the topology of the network can be mapped?
- A. Device(config)#flow-sampler-map topology
- B. Device(config)#lldp run
- C. Device(config-if)#cdp enable
- D. Device(config)#cdp run
Answer: B
Explanation:
cdp is cisco-proprietary whereas lldp is open standard. as well as cdp is enabled by default in all cisco devices.
NEW QUESTION # 225
Refer to the exhibit.
An engineer is configuring the HO router. Which IPv6 address configuration must be applied to the router fa0'1 interface for the router to assign a unique 64-brt IPv6 address to Itself?
- A. ipv6 address 2001:DB8:0:1:C601:42FF:FE0F:7/64
- B. ipv6 address 2001:DB8:0:1:C601:42FE:800F:7/64
- C. ipv6 address 2001 :DB8:0:1:FFFF:C601:420F:7/64
- D. iov6 address 2001 :DB8:0:1:FE80:C601:420F:7/64
Answer: A
NEW QUESTION # 226
An organization has decided to start using cloud-provided services. Which cloud service allows the organization to install its own operating system on a virtual machine?
- A. platform-as-a-service
- B. infrastructure-as-a-service
- C. software-as-a-service
- D. network-as-a-service
Answer: B
Explanation:
Below are the 3 cloud supporting services cloud providers provide to customer:
+ SaaS (Software as a Service): SaaS uses the web to deliver applications that are managed by a third- party vendor and whose interface is accessed on the clients' side. Most SaaS applications can be run directly from a web browser without any downloads or installations required, although some require plugins.
+ PaaS (Platform as a Service): are used for applications, and other development, while providing cloud components to software. What developers gain with PaaS is a framework they can build upon to develop or customize applications. PaaS makes the development, testing, and deployment of applications quick, simple, and cost-effective. With this technology, enterprise operations, or a third-party provider, can manage OSes, virtualization, servers, storage, networking, and the PaaS software itself. Developers, however, manage the applications.
+ IaaS (Infrastructure as a Service): self-service models for accessing, monitoring, and managing remote datacenter infrastructures, such as compute (virtualized or bare metal), storage, networking, and networking services (e.g. firewalls). Instead of having to purchase hardware outright, users can purchase IaaS based on consumption, similar to electricity or other utility billing.
In general, IaaS provides hardware so that an organization can install their own operating system.
NEW QUESTION # 227
Refer to the exhibit.
An administrator must configure interfaces Gi1/1 and Gi1/3 on switch SW11 PC-1 and PC-2 must be placed in the Data VLAN and Phone-1 must be placed in the Voice VLAN Which configuration meets these requirements?
- A. Option A
- B. Option B
- C. Option C
- D. Option D
Answer: C
NEW QUESTION # 228
Which range represents the standard access list?
- A. 0
- B. 1
- C. 2
- D. 3
Answer: A
NEW QUESTION # 229
Refer to the exhibit. When PC1 sends a packet to PC2, the packet has which source and destination IP address when it arrives at interface Gi0/0 on router R2?
- A. source 192.168.20.10 and destination 192.168.20.1
- B. source 192.168.10.10 and destination 192.168.20.10
- C. source 10.10.1.1 and destination 10.10.2.2
- D. source 192.168.10.10 and destination 10.10.2.2
Answer: B
Explanation:
Section: Network Fundamentals
Explanation:
The source and destination IP addresses of the packets are unchanged on all the way. Only source and destination MAC addresses are changed.
NEW QUESTION # 230
Refer to the exhibit.
How does router R1 handle traffic to 192.168.10.16?
- A. It selects the IS-IS route because it has the shortest prefix inclusive of the destination address.
- B. It selects the EIGRP route because it has the lowest administrative distance.
- C. It selects the RIP route because it has the longest prefix inclusive of the destination address.
- D. It selects the OSPF route because it has the lowest cost.
Answer: C
NEW QUESTION # 231
Refer to the Exhibit.
After the switch configuration the ping test fails between PC A and PC B Based on the output for switch 1. which error must be corrected?
- A. There is a native VLAN mismatch
- B. All VLANs are not enabled on the trunk
- C. The PCs are m the incorrect VLAN
- D. Access mode is configured on the switch ports.
Answer: A
NEW QUESTION # 232
......
Basics of Network Access
Network access covers the concepts of VLAN configuration and verification, interswitch connectivity verification and configuration, the configuration and verification of Layer 2 discovery protocols, and Cisco wireless architectures. It also addresses the configuration of wireless LAN components, WLC, and AP management access connections, and physical infrastructure connections of WLAN components.
Reliable CCNA 200-301 Dumps PDF May 20, 2025 Recently Updated Questions: https://testking.vceprep.com/200-301-latest-vce-prep.html