Pass D-PVM-DS-23 Brain Dump Updated Certification Sample Questions
Online D-PVM-DS-23 Test Brain Dump Question and Test Engine
NEW QUESTION # 29
Which type of notification is allowed when configuring Unisphere to send out notifications when an alert is triggered?
- A. FTP
- B. HTTP
- C. TCP
- D. SNMP
Answer: D
NEW QUESTION # 30
A storage administrator uses Unisphere for PowerMax to provision new storage from a VMAX All Flash array.
Which Workload Type is recommended for a combination of small and large block I/O workloads?
- A. Optimized
- B. OLTP
- C. DSS
- D. None
Answer: A
NEW QUESTION # 31
Which view of the Unisphere for PowerMax user interface can an architect go to for a heatmap?
- A. All Systems > Performance
- B. All Systems > Databases
- C. Selected System > System
- D. Selected System > Dashboard
Answer: D
NEW QUESTION # 32
What action is required on a PowerMax thin device before it can be deleted?
- A. Unmap from front-end ports
- B. Remove from Storage Group
- C. Set to Not Ready
- D. Set to Write Disable
Answer: B
NEW QUESTION # 33
A PowerMax eNAS solution is being designed with VMAX Sizer.
Which parameters need to be specified in the eNAS Properties tab when creating the eNAS instance?
- A. eNAS Boot Disks and Log Space
Workload Type - B. I/O Modules per Data Mover
eNAS Boot Disks and Log Space - C. Number of Data Movers
I/O Modules per Data Mover - D. Number of Data Movers
Capacity per Data Mover
Answer: A
NEW QUESTION # 34
A storage architect is designing a PowerMax solution. The architect must ensure that the Unisphere server is not directly connected to the arrays.
Which type of Unisphere for PowerMax deployment will achieve the design requirements?
- A. Remote Configuration
- B. CloudIQ
- C. eManagement
- D. Local Configuration
Answer: A
NEW QUESTION # 35
A storage architect is designing a PowerMax solution. The architect must customize the maximum SRDF/A cache usage.
Which system view can the architect use to meet this requirement?
- A. Data Protection
- B. System Settings
- C. Performance
- D. System Properties
Answer: B
NEW QUESTION # 36
Which product allows for local protection for Z Systems?
- A. RecoverPoint
- B. AppSync
- C. TimeFinder SnapVX
- D. PowerProtect
Answer: C
NEW QUESTION # 37
The SecurityAdmin for Unisphere wants to create a new user that will perform all management (active or control) operations on a storage system and be able to modify GNS group definitions in addition to all Monitor operations. The user will not be able to create or delete user accounts.
What role needs to be assigned to the new user?
- A. SecurityAdmin
- B. Device Management
- C. Admin
- D. StorageAdmin
Answer: D
NEW QUESTION # 38
An architect is configuring BCSD to design SRDF/S between two new PowerMax arrays. The architect has completed the tasks for the local side of the solution, including RA Port Group, Replication Group, and site switch.
What is the correct order of steps the architect needs to take to complete the SRDF setup?
Answer:
Explanation:
NEW QUESTION # 39
At a disaster planning meeting, an architect is presented with the following facts by a client:
A Unix host is replicating storage from a Production PowerMax to a VMAX 250FX.
RDF pairs have been split with Production and DR hosts accessing their respective storage.
Invalid tracks have started to build against PowerMax and VMAX 250FX.
The client now wants to bring production back to PowerMax, discarding the VMAX 250FX updates while keeping the updates on the PowerMax.
What is the correct action to take?
- A. Resume
- B. Establish
- C. Failover
- D. Failback
Answer: D
NEW QUESTION # 40
A PowerMax parent Storage Group (SG) contains two child SGs: SG1 and SG2.
What is a valid Host I/O bandwidth limit setting for this configuration?
- A. Parent SG: 400
SG1: 500
SG2: 200 - B. Parent SG: 500
SG1: 500
SG2: 400 - C. Parent SG: 400
SG1: 500
SG2: NOLIMIT - D. Parent SG: 500
SG1: NOLIMIT
SG2: 1000
Answer: B
NEW QUESTION # 41
What is the default data collection interval for TTP collections?
- A. 5 minutes
- B. 15 minutes
- C. 10 minutes
- D. 30 minutes
Answer: B
NEW QUESTION # 42
An architect uses the following command to collect data from a HP-UX host when designing a solution in BCSD:
sar -d -b interval count >> hostname.sar.date.txt
What does the -b flag in the command represent?
- A. Buffer
- B. Break
- C. Block
- D. Binary
Answer: A
NEW QUESTION # 43
Which deduplication methods are supported for VMAX all Flash?
- A. Adaptive Compression Engine, Compression I/O module, and LZS Compression algorithm
- B. DEFLATE compression algorithm, inline deduplication, and FBA storage Resource Pool
- C. Adaptive compression Engine, CKD Storage Resource Pool, and Compression I/O module
- D. Extended Data Compression, inline Deduplication, and LZS Compression algorithm
Answer: A
NEW QUESTION # 44
What will be the status of the links in a query after an SRDF suspend operation?
- A. Target Not Ready
- B. Split
- C. Suspended
- D. Not Ready
Answer: C
NEW QUESTION # 45
The Reserved Capacity for a Storage Resource Pool (SRP) on a VMAX All Flash array is set to 15%.
A TimeFinder SnapVX snapshot is created for a Storage Group containing 10 devices.
An application is actively performing read and write I/O to these devices. Allocation for the SRP reaches
85%.
What happens to the snapshot?
- A. Snapshot fails
- B. Snapshot persists but new snapshot deltas cannot be created
- C. Snapshot deltas are allocated from the Reserved Capacity
- D. Snapshot terminates
Answer: B
NEW QUESTION # 46
SRDF/A has been enabled between two PowerMax arrays. Due to a loss of all RDF links, the SRDF/A session has been placed in a Transmit Idle state.
What happens to cycle switching and the delta sets?
- A. Cycle switching stops; Transmit Delta Set count grows
- B. Cycle switching continues; Transmit Delta Set count grows
- C. Cycle switching continues; Capture Delta Set count grows
- D. Cycle switching stops; Capture Delta Set count grows
Answer: A
NEW QUESTION # 47
A VMware administrator has been tasked with managing storage for an ESXi cluster connected to a PowerMax array. The administrator is not familiar with Unisphere for PowerMax and wants to use the VMware Web Client to provision RDM volumes to virtual machines.
Which Dell EMC product provides this functionality?
- A. Client Integration Plug-in
- B. VASA
- C. VAAI
- D. VSI Plug-in
Answer: D
NEW QUESTION # 48
What is used to collect host-based performance metrics on HP-UX for use with BCSD?
- A. SAR
- B. DD
- C. IOSTAT
- D. SAM
Answer: A
NEW QUESTION # 49
Which migration options are supplied with PowerMaxOS and HYPERMAX OS at no cost?
- A. SRDF/DM, RecoverPoint, and AppSync
- B. NDM, Open Replicator, and AppSync
- C. NDM, Open Replicator, and SRDF/DM
- D. Open Replicator, RecoverPoint, and AppSync
Answer: C
NEW QUESTION # 50
A storage architect wants to estimate how much additional workload a VMAX All Flash running Enginuity 5876 can handle.
Which FAST component can be used to display application performance metrics on this storage system?
- A. Unisphere server installed on an open systems host
- B. Unisphere for PowerMax Workload Planner
- C. FAST does not have this option on a VMAX All Flash
- D. Storage Groups associated with a Service Level
Answer: B
NEW QUESTION # 51
In a legacy SRDF/A mode, the delta sets are numbered as follows:
Capture: N, Transmit: N-1, Receive: N-1, Apply: N-2
What is the number of the Transmit Delta Set after the second cycle switch?
- A. N-1
- B. N+2
- C. N+1
- D. N
Answer: C
NEW QUESTION # 52
A storage administrator is provisioning storage on a PowerMax 2000 array. The application requires fast reads and the highest possible data protection.
Which RAID level should be recommended?
- A. RAID 6 (6 + 2)
- B. RAID 5 (7 + 1)
- C. RAID 6 (14 + 2)
- D. RAID 5 (3 + 1)
Answer: A
NEW QUESTION # 53
......
Real EMC D-PVM-DS-23 Exam Dumps with Correct 114 Questions and Answers: https://testking.vceprep.com/D-PVM-DS-23-latest-vce-prep.html