Pass EMC D-VXR-OE-23 Exam Quickly With VCEPrep
Prepare D-VXR-OE-23 Question Answers - D-VXR-OE-23 Exam Dumps
NEW QUESTION # 74
A developer would like to test the VxRail API calls directly in their browser.
What tool should be used for this use case?
- A. VxRail API PowerShell package
- B. VxRail API RESTful API Cookbook
- C. VxRail Onboard API Documentation via Swagger
- D. VxRail API User Guide
Answer: C
NEW QUESTION # 75
A VxRail administrator wants to monitor vSAN Backend IOPS, Throughput, and Latency in the vSphere Web Client.
What must be turned on to monitor these metrics?
- A. vSAN Disk Management
- B. vSAN Health Service
- C. vSphere Distributed Resource Scheduler
- D. vSAN Performance Service
Answer: D
NEW QUESTION # 76
What is a consideration when planning for node expansion of an existing 4-node All-Flash Dell EMC VxRail 4.5.2xx cluster?
- A. Expansion procedure is performed by Dell EMC or a Dell EMC partner
- B. vSphere Web Client is used to perform the expansion procedure
- C. New nodes can be hybrid or All-Flash
- D. New nodes must be identical to the existing nodes
Answer: D
NEW QUESTION # 77
A VxRail administrator has configured a VxRail stretch cluster with the default distributed virtual switch networks.
Which network is missing?
- A. vSphere vMotion network
- B. Virtual SAN network
- C. Stretch network
- D. Management network
Answer: C
NEW QUESTION # 78
When using a vSAN storage policy with FTT = 1 and FTM = Mirroring, how many witness components exist for a VMDK?
- A. 0
- B. 1
- C. 2
- D. 3
Answer: D
NEW QUESTION # 79
As a VxRail administrator you have been asked to configure vSAN fault domains After selecting the VxRail cluster, where would you navigate to in vCenter to accomplish this task?
- A. Configure > vSAN > General > Fault Domains & Stretched Cluster
- B. Configure > vSAN > Fault Domains & Stretched Cluster
- C. Configure > vSAN > Disk Management > Fault Domains & Stretched Cluster
- D. Configure > vSAN > Configuration Assist > Fault Domains & Stretched Cluster
Answer: A
NEW QUESTION # 80
What is the order of steps to generate the SolVe procedure to add a capacity drive to a VxRail node?
Answer:
Explanation:
NEW QUESTION # 81
At what object level is vSAN deduplication and compression enabled for a VxRail system?
- A. Datacenter
- B. Disk group
- C. Cluster
- D. Virtual machine
Answer: C
NEW QUESTION # 82
Which VDS port group load balancing option requires Static LAG EtherChannel configuration?
- A. Route based on originating virtual port
- B. Route based on IP hash
- C. Route based on physical NIC load
- D. Route based on source MAC hash
Answer: B
NEW QUESTION # 83
What is the minimum number of nodes required to build a VxRail 4.5 cluster?
- A. 0
- B. 1
- C. 2
- D. 3
Answer: B
NEW QUESTION # 84
An administrator wants to expand a VxRail cluster by one node. The new node arrived with code that is newer than the cluster version.
What action must be taken before the new node can be added to the cluster successfully?
- A. The SD card on the new node must be exchanged with a new SD card with the required code version
- B. The cluster must be upgraded to match the code level of the new node before the node can be added
- C. The cluster must be RASR reset to match the code level of the new node before the node can be added
- D. The new node requires no action and will be downgraded automatically and added to the cluster
Answer: B
NEW QUESTION # 85
Which VxRail model is designed to be used in extreme environmental conditions?
- A. G Series
- B. D Series
- C. S Series
- D. E Series
Answer: B
NEW QUESTION # 86
What are the activities that can be performed from the Node Information panel of the VxRail Manager Physical back view of a VxRail E series node?
- A. Add Disks
Toggle Disk LEDs - B. Replace Disks
Shut down - C. Add Disks
Shut down
Toggle Chassis LED - D. Replace Disks
Shut down
Toggle Chassis LED
Answer: C
NEW QUESTION # 87
What is a consideration when expanding a vSAN disk group in a VxRail cluster?
- A. Deduplication and compression must be disabled for the disk group
- B. vSAN licensing must be applied to the VxRail cluster
- C. vSAN performance will be negatively impacted during expansion
- D. At least one capacity disk must be added along with a cache disk
Answer: D
NEW QUESTION # 88
Which level of data protection can be configured across sites in a VxRail Stretched Cluster?
- A. RAID 1
- B. RAID 5
- C. RAID 6
- D. RAID 1/10
Answer: A
NEW QUESTION # 89
In a VxRail appliance, which task is performed using VxRail Manager?
- A. Remediate health events
- B. Perform software upgrade
- C. Manage VxRail users and roles
- D. Create storage pools
Answer: B
NEW QUESTION # 90
Which VxRail model supports 25 Gb NICs?
- A. G410
- B. E460
- C. S570
- D. G560F
Answer: D
NEW QUESTION # 91
A customer has a 24-node standard VxRail cluster.
What is the maximum number of VxRail nodes that can be added to this cluster?
- A. 0
- B. 1
- C. 2
- D. 3
Answer: B
NEW QUESTION # 92
When is the vSAN performance service typically enabled?
- A. During periodic customer reviews
- B. Manually during cluster deployment
- C. Automatically during cluster deployment
- D. During diagnosis through a vendor support case
Answer: B
NEW QUESTION # 93
VxRail Health Monitoring should be disabled when which action is performed?
- A. Creating a Storage Policy
- B. Adding Users
- C. Changing a Group Policy
- D. Replacing a Node
Answer: D
NEW QUESTION # 94
At what object levels are vSAN performance information available?
- A. Cluster, Host, and VM
- B. Host, VM, and Process
- C. Cluster, VM, and Application
- D. Host, VM, and Application
Answer: A
NEW QUESTION # 95
......
Real EMC D-VXR-OE-23 Exam Questions [Updated 2024]: https://testking.vceprep.com/D-VXR-OE-23-latest-vce-prep.html