PASS 1z0-1042-24 exam with Oracle Real Exam Questions - 100% Valid!
Actual 1z0-1042-24 Exam Recently Updated Questions with Free Demo
NEW QUESTION # 15
Which three statements are true about SOAP and the advantages it provides?
- A. It leverages XML-based payloads to communicate between two client machines across any modern network.
- B. It provides flexibility for message format, allowing for loose coupling between client and server.
- C. It commonly serves as a cleaning agent to remove excess data from the transmission protocol.
- D. It is platform and programming language independent.
- E. As compared to RPC (Remote Procedure Calls), which are sometimes blocked by firewalls and proxy servers, SOAP over HTTP can overcome that limitation.
- F. SOAP clients can easily hold stateful references to remote server-side SOAP objects.
Answer: A,D,E
Explanation:
SOAP over HTTP helps bypass firewalls and proxies, uses XML-based messaging for platform independence, and is designed for interoperability between systems. SOAP does not clean excess data (C) and is typically stateless (F).
NEW QUESTION # 16
You receive a status code: 502 Proxy Error.
Which is a possible event cause for this error?
- A. While the proxy server is not responding to the request.
- B. When the proxy setup is incorrect.
- C. While registering a large number of devices using the Batch Registration feature under the Devices menu.
- D. While adding proxy for an enterprise application device.
Answer: C
Explanation:
A 502 Proxy Error can occur when the proxy server is overloaded or unresponsive due to a large number of concurrent requests, such as during the Batch Registration feature in the Oracle IoT Cloud. Incorrect proxy setup and server unresponsiveness can also cause the error.
NEW QUESTION # 17
Your design of an asynchronous OIC integration flow includes the requirement for additional processing logic that is conditionally based on the results returned to the integration instance from earlier external service invocations. You decide to leverage the Switch action to facilitate this implementation.
Which is a valid consideration concerning the configuration and capabilities of the Switch action?
- A. XPath version 2.0 functions can be used to create more complex conditional expressions for a branch.
- B. All branches within the Switch action must have a conditional expression defined.
- C. Any data objects returned within a branch of a Switch action will only be visible within the implicit scope of that branch and not visible in the main flow of the integration outside of the Switch action.
- D. You may need to create conditional expressions for each branch with greater complexity because nested Switch actions are not supported.
Answer: A
Explanation:
XPath version 2.0 functions can be used within the Switch action to create complex conditional expressions for branch evaluation in OIC.
NEW QUESTION # 18
When considering the configuration of APIs, Services, and Service Accounts in the API Platform Cloud Service, which two statements are valid?
- A. An API Platform policy can be configured to reference another policy to override credentials information.
- B. An API references Services and Service Accounts through the policies defining the API.
- C. A Service Account defines the security credentials required to invoke a back-end service.
- D. A Service must include a Service Account reference to invoke a back-end service.
- E. A Service Account is limited to using OAuth credentials only for defining security because Services can be configured to define Basic Authentication.
Answer: B,C
Explanation:
* C: API references Services and Service Accounts through policies.
* E: Service Accounts store credentials to access backend resources.Incorrect options:
* A: Service Accounts can store multiple types of credentials.
* B: A service doesn't necessarily require a Service Account.
* D: API policies inherit credentials but don't override them easily.
NEW QUESTION # 19
Which OIC XPATH function can be used to retrieve data from OIC Lookup within the data mapper tool?
- A. getLookup
- B. lookupvalue
- C. Get-value-from-lookup
- D. get-content-as-string
Answer: B
Explanation:
The lookupvalue function retrieves values from an OIC Lookup table, allowing you to map values between applications in the data mapper.
NEW QUESTION # 20
What policy is required to be in an API if that API is to be used under a Plan?
- A. Basic Auth
- B. Application Rate Limiting
- C. Interface Filtering
- D. Key Validation
Answer: D
Explanation:
Key Validation ensures that the API is used according to its plan. This policy checks that the correct key or token is presented for accessing the API under the given plan.
NEW QUESTION # 21
Which JNDI name value must be provided when configuring the properties of a new database adapter outbound connection pool to support dependent SOA composite applications?
- A. The corresponding XA datasource configuration deployed to the same WebLogic cluster.
- B. The corresponding XA enterprise resource adapter application deployed to the same WebLogic cluster.
- C. The defined XA database adapter connection factory configured for this WebLogic domain.
- D. The associated XA database adapter plan deployed with this database adapter outbound connection pool.
Answer: A
Explanation:
The correct JNDI name value for the database adapter outbound connection pool is the JNDI name of the corresponding XA datasource configuration deployed to the WebLogic cluster. This ensures that the SOA composite application can access the required database resources.
NEW QUESTION # 22
What are the four steps required to complete the task 'create a connection'?
- A. Configure Connection Security
- B. Test Connection
- C. Select an Adapter
- D. Configure Lookup
- E. Import SSL Certificate
- F. Configure Connection Properties
Answer: A,B,C,F
Explanation:
The four steps to creating a connection are selecting an adapter, configuring connection properties, configuring security, and testing the connection. Importing SSL certificates and configuring lookups are optional tasks.
NEW QUESTION # 23
What is the default value for Command Notification Timeout?
- A. 5 seconds
- B. 2 seconds
- C. 10 seconds
- D. 1 second
Answer: A
Explanation:
The default value for Command Notification Timeout in Oracle Cloud is 5 seconds.
NEW QUESTION # 24
OIC integrations can be exported so that they can later be imported into another OIC instance environment.
Which statement is NOT true about the import and export of OIC integrations?
- A. Imported integration can be reconfigured to use different connection resources by using the OICREST API.
- B. Integrations must be exported as a package if you want to import them into another OIC environment.
- C. Imported integrations cannot be immediately activated if their dependent connection resources are not already present in the target OIC environment.
- D. Exported integrations will include all of their dependent connection resource information with the exception of URL and credentials.
Answer: B
Explanation:
* A, B, and Care all true statements about OIC import/export functionality.
* Dis false because integrations can be exported individually and imported into another OIC environment without needing to be part of a package. Packages are optional.
NEW QUESTION # 25
In Oracle Integration Cloud (OIC), you are working on an integration that uses a REST trigger, which will require authentication. You need to ensure that only authorized clients can access the integration.
Which configuration should you apply?
- A. Set up an IP whitelist in the OIC instance, allowing only specific IP addresses to access the integration.
- B. Enable Cross-Origin Resource Sharing (CORS) and set an API key in the REST Adapter configuration.
- C. Encrypt the payload using a custom encryption algorithm and provide the decryption key to authorized clients.
- D. Configure the REST Adapter with a Basic Authentication or OAuth 2.0 security policy and provide the required credentials.
Answer: D
Explanation:
Configuring Basic Authentication or OAuth 2.0 is the most appropriate and secure method to authenticate clients accessing your OIC integration via a REST trigger.
NEW QUESTION # 26
Which two are ways the Oracle Internet of Things (IoT) Cloud Service environment can be accessed?
- A. Using Web Browser
- B. Using SOAP Interface
- C. Using a desktop client
- D. Using REST Interface
Answer: A,D
NEW QUESTION # 27
To use Integration Insight to map milestones to actions in an Oracle Integration Cloud (OIC) business process implementation, certain prerequisites and conditions must be met.
Which is NOT a valid consideration for models and mapping milestones?
- A. The model must be in Draft state in order to map a milestone to an integration action.
- B. A business process implementation can be mapped to milestones within only one model.
- C. Extraction criteria for the instance unique identifier is defined with an XPath extension.
- D. Extraction criteria for the milestone indicator is defined with an XPath expression.
- E. Milestones in a single model can be mapped to multiple business processes.
Answer: B
Explanation:
A business process implementation can be mapped to milestones across multiple models, makingBthe incorrect statement. Milestones can be used in complex scenarios, shared between processes, and can be identified with XPath expressions.
NEW QUESTION # 28
Which statement is NOT true about Schedule Parameters in Oracle Integration Cloud (OIC) integration flows?
- A. Updates to Schedule Parameter values can be made manually when starting a schedule.
- B. Updates to Schedule Parameter values made dynamically in an Assign action will not persist on to the next instance run of the integration.
- C. Updates to Schedule Parameter values can be made manually before submitting an ad hoc request.
- D. Schedule Parameters are always visible as an additional data source in the Sources section of the mappers and expression editors within the integration.
Answer: D
Explanation:
Schedule parameters are not directly visible as data sources in the mapper or expression editors. They are used for dynamic configuration during execution.
NEW QUESTION # 29
The Integrations flow element in Oracle Integration Cloud (OIC) processes provides you an option to easily integrate your process application with other applications and services.
Which three types can be added and managed from the Integrations flow element?
- A. OIC integrations hosted within the same OIC environment
- B. Web Service Connectors
- C. OCI Functions deployed in the same OCI compartment hosting the OIC environment
- D. OIC invokable dynamic processes hosted within the same OIC environment
- E. REST Connectors
Answer: A,B,E
Explanation:
The three types that can be added and managed in OIC integrations are OIC integrations hosted within the environment, Web Service Connectors, and REST Connectors. OCI Functions are not directly managed from the integrations flow element.
NEW QUESTION # 30
Which two statements about lookups are correct?
- A. Create a lookup to map values between applications.
- B. Lookups are deployed as part of integration activation.
- C. Changes made to lookups already used in active integrations take effect immediately.
- D. You cannot clone a copy of an existing lookup.
Answer: A,C
Explanation:
* A: Lookups are used to map values between different applications and systems.
* C: Changes made to lookups in OIC are applied in real time, affecting active integrations immediately.
* Bis incorrect as lookups are independent entities and not tied to integration activation.
* Dis incorrect because you can clone existing lookups.
NEW QUESTION # 31
Which APIs does Oracle Internet of Things (IoT) Cloud Service use to perform an analysis?
- A. JavaScript APIs
- B. SQL Queries
- C. Native Spark Java APIs
- D. Big Data APIs
Answer: C
Explanation:
Oracle IoT Cloud Service uses native Spark Java APIs to perform analytics. This allows efficient processing of large datasets generated by IoT devices.
NEW QUESTION # 32
You can group one or more Oracle Integration Cloud (OIC) integrations into a single structure called a package.
Which statement is NOT true about OIC packages?
- A. You can import packages directly from the Oracle Marketplace.
- B. New packages can be created by clicking the Create button on the Packages page in the console.
- C. All packages must include at least one integration.
- D. Integrations do not need to be part of a package.
- E. Packages enable you to easily import and export a group of integrations to and from OIC.
- F. Packages cannot be locked to deny other users access to your integrations.
Answer: F
Explanation:
Packages in OIC cannot be locked to prevent other users from accessing the integrations. The other statements are true, including the ability to create, import, and manage integrations within packages.
NEW QUESTION # 33
You are tasked with monitoring the SOA composite application and the underlying environment within a SOA Cloud Service instance.
Which tool should you use?
- A. Load Balancer Console
- B. Manage File Transfer Console
- C. Oracle Service Bus Console
- D. WebLogic Server Console
- E. B2B Console
- F. Fusion Middleware Control
Answer: F
Explanation:
Fusion Middleware Control is the primary tool for monitoring SOA composite applications, providing detailed metrics, fault management, and health monitoring.
NEW QUESTION # 34
OIC is available in two editions - Standard and Enterprise. Which OIC Enterprise Edition capabilities are ALSO available in the OIC Standard edition? (Select two)
- A. B2B Trading Partner Agreements
- B. Integration Insight
- C. File Server
- D. Process Applications
- E. Enterprise application Adapters (such as EBS, JDE, SAP, and Siebel)
- F. Visual Builder
Answer: C,F
Explanation:
Both the File Server and Visual Builder capabilities are available in the OIC Standard edition, along with the Enterprise edition. Other capabilities, such as B2B and Process Applications, are exclusive to the Enterprise edition.
NEW QUESTION # 35
Which two statements are true regarding the mapper activity?
- A. You cannot drag and drop an XSLT flow control statement directly to a target node element.
- B. You cannot drag and drop a source element to a target node element that is already mapped.
- C. You cannot drag and drop an XPath function activity directly to a target node element.
- D. You can drag and drop a source data element to multiple target node elements.
Answer: A,D
Explanation:
* B: XSLT flow control statements cannot be directly dragged to target elements in the mapper.
* D: A single source data element can be mapped to multiple target node elements.Incorrect:
* A: XPath functions can be mapped to target node elements.
* C: You can map a source element to a target element even if the target is already mapped.
NEW QUESTION # 36
......
1z0-1042-24 Free Sample Questions to Practice One Year Update: https://testking.vceprep.com/1z0-1042-24-latest-vce-prep.html