Real Juniper JN0-635 Exam Dumps with Correct 90 Questions and Answers
Valid JN0-635 Test Answers & Juniper JN0-635 Exam PDF
Recertification Details
You can recertify for the JNCIP-SEC through testing by passing the relevant professional-level exam, by nailing the expert-level exam to advance the certification level, or by attending courses by Juniper Networks or any Juniper Networks Authorized Education Partners. If you pass an exam or take a course that is at a higher level than the certification you opt to recertify, you can renew all lower-level designations within that certification track. For example, if you recertify the expert-level JNCIE-SEC certification either through testing or by a course, you would have effectively recertified the lower-level security certificates including the JNCIP-SEC, JNCIS-SEC, and JNCIA-SEC. This recertification is valid for another three years from the time you passed the recertification exam or course. If you fail to recertify by the end of the active period, you will have to re-earn the certification from scratch.
NEW QUESTION 45
Click the Exhibit button.
Referring to the exhibit, which three topologies are supported by Policy Enforcer? (Choose three.)
- A. Topology 1
- B. Topology 2
- C. Topology 3
- D. Topology 5
- E. Topology 4
Answer: A,C,E
NEW QUESTION 46
You have configured three logical tunnel interfaces in a tenant system on an SRX1500 device. When committing the configuration, the commit fails.
In this scenario, what would cause this problem?
- A. The SRX1500 device requires a tunnel PIC to allow for logical tunnel interfaces
- B. There is no GRE tunnel between the tenant system and master system allowing SSH traffic
- C. There is no VPLS switch on the tenant system containing a peer It-0/0/0 interface
- D. The SRX1500 device does not support more than two logical interfaces per tenant system
Answer: C
NEW QUESTION 47
Click the Exhibit button.
Given the command output shown in the exhibit, which two statements are true? (Choose two.)
- A. Network Address Translation is applied to this session
- B. Traffic matching this session has been received since the session was established
- C. The host 10.10.101.10 is directly connected to interface ge-0/0/4.0
- D. The host 172.31.15.1 is directly connected to interface ge-0/0/3.0
Answer: B,C
NEW QUESTION 48
You have configured three logical tunnel interfaces in a tenant system on an SRX1500 device. When committing the configuration, the commit fails.
In this scenario, what would cause this problem?
- A. The SRX1500 device requires a tunnel PIC to allow for logical tunnel interfaces
- B. There is no GRE tunnel between the tenant system and master system allowing SSH traffic
- C. There is no VPLS switch on the tenant system containing a peer It-0/0/0 interface
- D. The SRX1500 device does not support more than two logical interfaces per tenant system
Answer: C
Explanation:
Explanation/Reference: https://www.juniper.net/documentation/en_US/junos/topics/topic-map/logical-systems- overview.html
NEW QUESTION 49
Click the Exhibit button.
Referring to the exhibit, what is the maximum number of zones that are able to be created within all logical systems?
- A. 0
- B. 1
- C. 2
- D. 3
Answer: D
NEW QUESTION 50
When would you use the port-overloading-factor 1setting?
- A. to set the maximum port-overloading capacity to 65,536
- B. to map ports with 1:1 ratio for port-overloading
- C. to disable the port-overloading
- D. to enable the port-overloading
Answer: C
Explanation:
Explanation/Reference: https://www.juniper.net/documentation/en_US/junos/topics/reference/configuration-statement/ security-edit-port-overloading-interface-source-nat.html
NEW QUESTION 51
You are asked to configure an SRX Series device to bypass all security features for IP traffic from the engineering department.
Which firewall filter will accomplish this task?
A)
B)
C)
D)
- A. Option B
- B. Option D
- C. Option C
- D. Option A
Answer: B
NEW QUESTION 52
Which two VPN features are supported with CoS-based IPsec VPNs? (Choose two.)
- A. IKEv1
- B. dead peer detection
- C. IKEv2
- D. VPN monitoring
Answer: B,C
NEW QUESTION 53
Click the Exhibit button.
Referring to the exhibit, which two statements are true? (Choose two.)
- A. Events based on this third-party feed will affect a host's threat score
- B. SRX Series devices will not block traffic based on this third-party feed
- C. Events based on this third-party feed will not affect a host's threat score
- D. SRX Series devices will block traffic based on this third-party feed
Answer: C,D
NEW QUESTION 54
Which two modes are supported on Juniper Sky ATP? (Choose two.)
- A. global mode
- B. private mode
- C. secure wire mode
- D. tap mode
Answer: C,D
NEW QUESTION 55
Which two log format types are supported by the JATP appliance? (Choose two.)
- A. YAML
- B. XML
- C. CSV
- D. YANG
Answer: B,C
Explanation:
Reference:
https://www.juniper.net/documentation/en_US/release-independent/jatp/topics/topic-map/jatp-custom-log-ingestion.html
NEW QUESTION 56
You are connecting two remote sites to your corporate headquarters site; you must ensure that all traffic is secured and only uses a single Phase 2 SA for both sites.
In this scenario, which VPN should be used?
- A. An IPsec group VPN with the corporate firewall acting as the hub device.
- B. Full mesh IPsec VPNs with tunnels between all sites.
- C. A full mesh Layer 3 VPN with the corporate firewall acting as the hub device.
- D. A hub-and-spoke IPsec VPN with the corporate firewall acting as the hub device.
Answer: A
Explanation:
Explanation
https://www.juniper.net/us/en/local/pdf/app-notes/3500202-en.pdf
NEW QUESTION 57
You opened a support ticket with JTAC for your Juniper ATP appliance. JTAC asks you to set up access to the device using the reverse SSH connection.Which three setting must be configured to satisfy this request? (Choose three.)
- A. Enable JTAC remote access
- B. Enable a JATP support account.
- C. Enable remote support.
- D. Create a temporary root account.
- E. Create a temporary admin account.
Answer: B,C,E
Explanation:
Explanation
https://kb.juniper.net/InfoCenter/index?page=content&id=TN326&cat=&actp=LIST&showDraft=false
NEW QUESTION 58
An administrator wants to implement persistent NAT for an internal resource so that external hosts are able to initiate communications to the resource, with the internal resource having previously sent packets to the external hosts.
Which configuration setting is used to accomplish this goal?
- A. address-persistent
- B. persistent-nat permit target-host-port
- C. persistent-nat permit any-remote-host
- D. persistent-nat permit target-host
Answer: C
NEW QUESTION 59
Click the Exhibit button.
You have configured tenant systems on your SRX Series device.
Referring to the exhibit, which two actions should you take to facilitate inter-TSYS communication? (Choose two.)
- A. Connect each TSYS with the interconnect switch by configuring INET configured logical tunnel interfaces in the interconnect switch
- B. Place the logical tunnel interfaces in a virtual router routing instance in the interconnect switch
- C. Place the logical tunnel interfaces in a VPLS routing instance in the interconnect switch
- D. Connect each TSYS with the interconnect switch by configuring Ethernet VPLS configured logical tunnel interfaces in the interconnect switch
Answer: A,B
NEW QUESTION 60
You have a webserver and a DNS server residing in the same internal DMZ subnet. The public Static NAT addresses for the servers are in the same subnet as the SRX Series devices internet-facing interface. You implement DNS doctoring to ensure remote users can access the webserver.Which two statements are true in this scenario? (Choose two.)
- A. The DNS doctoring ALG is not enabled by default.
- B. The DNS CNAME record is translated.
- C. The DNS doctoring ALG is enabled by default.
- D. The Proxy ARP feature must be configured.
Answer: C,D
NEW QUESTION 61
You are configuring transparent mode on an SRX Series device. You must permit IP-based traffic only, and BPDUs must be restricted to the VLANs from which they originate.
Which configuration accomplishes these objectives?
A)
B)
C)
D)
- A. Option B
- B. Option D
- C. Option C
- D. Option A
Answer: B
Explanation:
Explanation
https://www.juniper.net/documentation/us/en/software/junos/multicast-l2/topics/ref/statement/family-ethernet-sw
NEW QUESTION 62
A user is unable to reach a necessary resource. You discover the path through the SRX Series device includes several security features. The traffic is not being evaluated by any security policies.
In this scenario, which two components within the flow module would affect the traffic? (Choose two.)
- A. route lookup
- B. destination NAT
- C. source NAT
- D. services/ALG
Answer: A,B
NEW QUESTION 63
......
Important Details to Know about JN0-635 Certification Test
The content covered by this JN0-635 exam is provided through recommended tutor-conducted courses and other comprehensive resources. You can obtain more information about this in the up and coming sections of this article. Also, you need to have the JNCIS-SEC certification as a prerequisite for the JNCIP-SEC certificate. To register for JN0-635 exam, create an account with Pearson VUE. You can choose a test center of your choice and then select JN0-635 in the list of tests. If you have already taken Juniper Networks evaluations before, you can register with your existing CertManager ID.
JN0-635 Exam Questions and Valid PMP Dumps PDF: https://testking.vceprep.com/JN0-635-latest-vce-prep.html