[Apr 15, 2024] NACE-CIP2-001 Questions Truly Valid For Your NACE Exam!
NACE-CIP2-001 Actual Questions - Instant Download Tests Free Updated Today!
NACE-CIP2-001 (Coating Inspector Level 2) Exam is an internationally recognized certification program designed for individuals who are seeking a career in the field of corrosion control and coatings. NACE-CIP2-001 exam is administered by the National Association of Corrosion Engineers (NACE), which is a professional organization that offers a variety of training and certification programs to individuals working in the field of corrosion control and prevention.
The NACE NACE-CIP2-001 exam consists of two parts: a written exam and a practical exam. The written exam consists of 120 multiple-choice questions that cover the various topics related to coatings inspection. The practical exam involves hands-on testing of the candidate's ability to perform coating inspections and quality control procedures. The practical exam is conducted in a laboratory setting and requires the candidate to demonstrate their proficiency in using various inspection tools and equipment.
NACE-CIP2-001 (Coating Inspector Level 2) Certification Exam is a globally recognized certification program that aims to assess an individual's knowledge and skills in coating inspection. Coating Inspector Level 2 certification is awarded by the National Association of Corrosion Engineers (NACE), which is an internationally recognized professional organization that provides training and certification programs in corrosion prevention and control.
NEW QUESTION # 37
Because a NACE Level 2 Inspector has been trained in specific destructive tests, it is up to the Inspector to decide if and when a destructive test is required.
- A. False
- B. True
Answer: A
NEW QUESTION # 38
A reinforced coating is
- A. less resistant to movement, abrasion, and impact than a non-reinforced coating.
- B. more resistant to movement, abrasion, and impact than a non-reinforced coating.
- C. equally resistant to movement and impact as a non-reinforced coating.
- D. equally resistant to abrasion and impact as a non-reinforced coating.
Answer: B
NEW QUESTION # 39
Individuals conducting Coating Surveys should:
- A. Always be trained and experienced Coating Industry
- B. Always be NACE Level 3 Certified Inspectors
- C. Always be NACE or SSPC Protective coating Specialists
- D. Always be experienced Specification Writers
Answer: A
NEW QUESTION # 40
Surface preparation methods for Non-ferrous metals are:
- A. Specific for each type of Non-ferrous metal
- B. The same as for Ferrous metals
- C. Not required
- D. The same for all Non-FetT0us metals
Answer: A
NEW QUESTION # 41
Inspectors perform tests on linings that they may not perform on exterior coatings because
- A. linings are more durable than coatings.
- B. coatings are expected to degrade over time.
- C. coatings are more durable than linings.
- D. linings protect the contents and the container.
Answer: D
NEW QUESTION # 42
You are the NACE Level 2 Inspector with the final responsibility to prepare the final report for a very large structural steel shop project which has gone very well. It is due next week. The work has been ongoing for two years and several NACE Level 1 Inspectors have worked under your supervision throughout the project. You find you are missing one week of daily reports for the night shift from the very beginning of the project and despite your best efforts they are cannot found.
You FIRST preferred course of action is to:
- A. Do not complete your report until they can be found
- B. Plainly state in your report that they are missing
- C. Re-create the reports as not much was going on during night shift anyway
- D. Use creative writing to cover over the fact they are missing
Answer: B
NEW QUESTION # 43
Eddy current DFT gauges are used to measure Dry Film Thickness in which of the following situations:
- A. Non-Conductive coatings applied to a conductive metallic substrate
- B. Conductive coatings applied to a magnetic metallic substrate
- C. Magnetic coatings applied to a magnetic metallic substrate
- D. Conductive coatings applied to a cementitious substrate
Answer: A
NEW QUESTION # 44
NACE No.13/ SSPC 6 identifies the use of:
- A. Abrasive blasting only
- B. Various methods of cleaning
- C. Watterjetting only
- D. Steam cleaning only
Answer: B
NEW QUESTION # 45
Dehumidification is defined as the removal of moisture vapor from the air to
- A. lower its dew point,
- B. raise its relative humidity.
- C. lower its temperature
- D. provide worker comfort.
Answer: A
NEW QUESTION # 46
You are the new NACE Level 2 Inspector on a job which had been very problematic. The previous Inspector was fired duo to personality conflicts with the Contractor's supervisor. Upon arriving onsite the Contractor's supervisor advises you in no uncertain terms that you will be the next to go, unless you cooperate with him.
Your FIRST preferred course of action is to:
- A. Suggest to the Owner that the supervisor should be removed from site
- B. Express a willingness to work with the site team and follow the specification
- C. Challenge the supervisor's authority
- D. Defend the previous inspector
Answer: B
NEW QUESTION # 47
Linings are used on the interior of pipelines to
- A. reduce magnetic polarity.
- B. afford limited temperature insulation.
- C. provide protection against soil chemicals.
- D. protect the transported product.
Answer: D
NEW QUESTION # 48
The best choice of instrument for holiday testing of thick film concrete coatings is:
- A. Low Voltage Sponge Type
- B. High Voltage DC Constant Current
- C. High Voltage AC
- D. High Voltage DC Pulse Type
Answer: B
NEW QUESTION # 49
You are working as the only in-house NACE Level 2 Inspector in a shop setting when an independent 3 rd party NACE Level 3 Inspector, representing the owner, presents you with a copy of a Non Conformance Report (NCR) he has written for a NACE2/SSPC SP 10 centrifugal blast which you had previously approved.
Your FIRST preferred course of action is to:
- A. Consult your supervisor
- B. Request a re-blast of the item in question
- C. Review the NCR with the other Inspector
- D. Verbally challenge the NCR
Answer: A
NEW QUESTION # 50
A failure caused by applying a coating too thinly is known as
- A. pinholes.
- B. failure to cure.
- C. chalking.
- D. cracking.
Answer: A
NEW QUESTION # 51
Inspection and Test plans are developed by referencing:
- A. The Specification, SDS, relevant Standards and Codes
- B. The Specification, Application Guidelines, 'Relevant Standards and Codes
- C. The Specification, Safety Manual, Relevant Standards and Codes
- D. The Specification, TDS, relevant Standards and Codes
Answer: D
NEW QUESTION # 52
In powder coatings, when the particles of powder begin to flow but are not fully liquid, they are in what stage?
- A. Wetting stage
- B. Cure stage
- C. Gel stage
- D. Flow stage
Answer: D
NEW QUESTION # 53
You can use magnifiers to examine all of the following EXCEPT
- A. Mill scale
- B. Surface cleanliness
- C. Blisters
- D. Surface profile
Answer: B
NEW QUESTION # 54
Cold-applied tape
- A. have a cross-linked polyethylene backing and a heat-activated adhesive.
- B. is polyethylene film, heat laminated, 'With an adhesive layer of butyl glue.
- C. are identifiable by its distinct colors, usually light blue, green, Or Grey.
- D. is typically green or led and looks like "painted" finish.
Answer: B
NEW QUESTION # 55
The solvent sensitivity/solvent wipe test (ASTM D4752) is used to determine the cure of
- A. urethanes.
- B. powder coatings.
- C. epoxies.
- D. inorganic zincs.
Answer: D
NEW QUESTION # 56
WJ-1 is always performed using UHWJ at pressures above 210 MPa (30,000 PSI)
- A. False
- B. True
Answer: B
NEW QUESTION # 57
Coating application to concrete substrates is:
- A. More challenging than coating steel
- B. Less challenging, than coating steel
- C. Not required as Concrete is inorganic
- D. The same as coating steel
Answer: A
NEW QUESTION # 58
Inspector reports should always be copied to:
- A. Whomever the Owner identifies
- B. The Contractor and Owner
- C. All parties involved in the project
- D. The Owner only
Answer: A
NEW QUESTION # 59
......
Get instant access of 100% real exam questions with verified answers: https://testking.vceprep.com/NACE-CIP2-001-latest-vce-prep.html