CIP Level 2 Certification NACE-CIP2-001 Sample Questions Reliable
Prepare for the Actual CIP Level 2 NACE-CIP2-001 Exam Practice Materials Collection
To become a certified coating inspector at level 2, candidates must pass the NACE-CIP2-001 certification exam. NACE-CIP2-001 exam covers a wide range of topics, including surface preparation, coating application, inspection techniques, and safety procedures. NACE-CIP2-001 exam is designed to be challenging, and candidates must have a thorough understanding of the principles and practices of coating inspection to pass.
NEW QUESTION # 59
When a coating is expected to be exposed to temperatures above 93C (200 F) the best choice would be:
- A. Latex
- B. Polyurea
- C. Inorganic Coatings
- D. Organic coatings
Answer: C
NEW QUESTION # 60
WJ-1 is always performed using UHWJ at pressures above 210 MPa (30,000 PSI)
- A. False
- B. True
Answer: B
NEW QUESTION # 61
Individuals conducting Coating Surveys should:
- A. Always be experienced Specification Writers
- B. Always be NACE or SSPC Protective coating Specialists
- C. Always be trained and experienced Coating Industry
- D. Always be NACE Level 3 Certified Inspectors
Answer: C
NEW QUESTION # 62
Which standards are generally established by private-sector bodies and are available for use by any person or Organization, private or government?
- A. Mandatory
- B. Consensus
- C. De facto
- D. Voluntary
Answer: D
NEW QUESTION # 63
Because a NACE Level 2 Inspector has been trained in specific destructive tests, it is up to the Inspector to decide if and when a destructive test is required.
- A. False
- B. True
Answer: A
NEW QUESTION # 64
Galvanizing performs best in which of the following exposures:
- A. pH of 13
- B. pH below 4
- C. pH above 12
- D. pH between 5-10
Answer: D
NEW QUESTION # 65
Which concrete smoothing technique involves scrubbing a mixture of cement mortar over the concrete surface using ai cement sack, gunny sack, or sponge rubber float?
- A. Acid etching
- B. Stoning
- C. Sacking
- D. High-pressure water washing
Answer: C
NEW QUESTION # 66
You should bulk store coatings containing isocyanates
- A. wherever it is convenient
- B. in a heated warehouse.
- C. in a refrigerated warehouses
- D. in a well ventilated area separate from the work place.
Answer: D
NEW QUESTION # 67
Coating application to concrete substrates is:
- A. Less challenging, than coating steel
- B. The same as coating steel
- C. More challenging than coating steel
- D. Not required as Concrete is inorganic
Answer: C
NEW QUESTION # 68
Steel shot grit contaminated with oil or grease used in a cetrifugal blast cleaning should be
- A. washed with clean potable water prior to Use.
- B. run through the air wash separator.
- C. disposed of properly.
- D. mixed with uncontaminated abrasive
Answer: C
NEW QUESTION # 69
The Concrete Repair Institute's comparators can be used to assess:
- A. Contamination levels prior to coating
- B. Surface cleanliness prior to coating
- C. Surface profile prior to coating
- D. Compressive and tensile strength prior to coating
Answer: C
NEW QUESTION # 70
When working with someone who is very concerned about Stability and maintaining adherence to the status-quo, the Inspector should try to:
- A. Make sure they are the center of attention in all site meetings
- B. Give them as much advance notice as possible about upcoming changes
- C. Implement immediate to get them motivated
- D. Challenge their value to the team and try to get them out of their comfort zone
Answer: B
NEW QUESTION # 71
Inspectors perform tests on linings that they may not perform on exterior coatings because
- A. linings protect the contents and the container.
- B. linings are more durable than coatings.
- C. coatings are more durable than linings.
- D. coatings are expected to degrade over time.
Answer: A
NEW QUESTION # 72
When environmental enclosures are being used an inspector needs to be concerned about:
- A. Air changes
- B. Lighting
- C. Structural integrity
- D. a), b), and c)
Answer: D
NEW QUESTION # 73
NACE/SSPC Water Jetting standards are directly equivalent to ISO Abrasive Blast Standards:
- A. False
- B. True
Answer: A
NEW QUESTION # 74
The standards defining surface cleanliness achieved by centrifugal blast cleaning are:
- A. Comparable to air blast cleaning
- B. Different than air blast cleaning
- C. The same as air blast cleaning
- D. Slightly different to air blast cleaning
Answer: C
NEW QUESTION # 75
An Inspection and Test Plan is required when:
- A. It is always required
- B. When the Owner specifies one
- C. When the Inspector requests one
- D. When the Coating Applicator requests one
Answer: A
NEW QUESTION # 76
Examples of non-ferrous metals include
Select All that Apply:
- A. aluminum
- B. mild steel.
- C. iron
- D. copper
Answer: A,D
NEW QUESTION # 77
You are the NACE Level 2 Coating Inspector where SSPC PA 2 has been specified with an additional requirement that no individual gauge reading shall be below a certain value.
As this is not part of the standard you should:
- A. Request clarification from the specifier
- B. Call your supervisor
- C. Enforce the additional requirement
- D. Ignore the additional requirement
Answer: C
NEW QUESTION # 78
A reinforced coating is
- A. equally resistant to abrasion and impact as a non-reinforced coating.
- B. less resistant to movement, abrasion, and impact than a non-reinforced coating.
- C. more resistant to movement, abrasion, and impact than a non-reinforced coating.
- D. equally resistant to movement and impact as a non-reinforced coating.
Answer: C
NEW QUESTION # 79
Which type of pipelines collect the gas from the transmission system so utility companies can distribute the gas to end users?
- A. Transmission
- B. Distribution
- C. Gathering
- D. Midstream
Answer: B
NEW QUESTION # 80
When completing the Final Inspection report the Inspector should write the report using:
- A. Language that only technical experts would understand
- B. Language that only in the project would understand
- C. Language that another NACE Inspector would understand
- D. Language that the most would understand
Answer: D
NEW QUESTION # 81
When performing a hardness test on a coating which has elastic properties the inspector is likely to likely to observe:
- A. Cold flow or creep
- B. A very low reading
- C. A very high reading
- D. No difference from any other coating
Answer: A
NEW QUESTION # 82
You have just your NACE CIP Level 2 certification when you are asked to supervise a team of uncertified field pipeline inspectors.
Your FIRST preferred course of action is to:
- A. Accept assignment without hesitation
- B. Review the NACE Attestation prior to making a decision
- C. Advise the prospective employer that you cannot accept the position
- D. Meet with the prospective employer to scope of your role
Answer: B
NEW QUESTION # 83
The cost of qualified Coating Inspection is normally offset by:
- A. Lower Coating Life Cycle Costs
- B. Lower Supervision Costs
- C. Lower Application Costs
- D. Lower Safety Enforcement Costs
Answer: A
NEW QUESTION # 84
......
Ace NACE NACE-CIP2-001 Certification with Actual Questions Feb 12, 2025 Updated: https://testking.vceprep.com/NACE-CIP2-001-latest-vce-prep.html